RAIB reveals Barking freight train’s derailed wagon ‘travelled’ for 1.1km

Britain’s statutory watchdog, the Rail Accident Investigation Branch (RAIB) has published further details of the derailment of a GB Railfreight intermodal train at Barking on 23 October. Preliminary analysis of the locomotive’s on-train data recorder shows that the train was travelling at around 8mph (about 13km/h) when its brakes were applied. It stopped before moving again approximately two minutes later. One wagon subsequently derailed during these movements and continued for approximately 1.1km, with the wagon’s wheels running on sleepers and ballast.

The derailed wagon was the 20th in a formation of 39 intermodal container wagons. The train passed through platform 8 at Barking station before the driver was alerted by the signaller. The incident caused extensive damage to track, signalling equipment and adjacent infrastructure. No injuries were reported.

Train continued for more than a kilometre

According to the interim report, studied by RailFreight.com, the incident occurred at approximately 13:04 on Friday 23 October, on the Up Tilbury Line, around 700 metres south-east of Barking station. On the British network, “Up” is generally the London-bound direction. The train was travelling from London Gateway to Hams Hall, Birmingham. It was operated by GB Railfreight and comprised a pair of Class 99 bi-mode locomotives, one being hauled dead, and 39 intermodal container wagons.

The alarm was raised to the driver by a signaller, who didn’t observe the train directly, but who had noticed a loss of detection on multiple sets of points. This alerted railway staff to a problem with the train and infrastructure. The RAIB says the wagon and surrounding railway equipment sustained significant damage. The incident resulted in no reported injuries.

RAIB examine train and infrastructure at Barking

According to the RAIB, preliminary analysis of the leading locomotive’s on-train data recorder showed the train travelling at approximately 8mph (13km/h) when its brakes were applied, possibly simply for routine compliance with adverse signals. This brought the train to a stop. After approximately two minutes, it began moving again. The 20th wagon from the front derailed during these movements. The RAIB has not yet established why the wagon left the rails.

Rebuilding the railway at Barking station. Image: © c2c
Rebuilding the railway at Barking station. Image: © c2c

As is also routine, the RAIB investigation will examine the cause and sequence of events leading up to the derailment. This will include the actions of those involved and any factors that may have influenced their decisions. The condition of the railway infrastructure at the location will also come under scrutiny. The RAIB has identified this as a specific area of investigation.

London Gateway and Tilbury freight operations affected

The incident also had consequences for freight operations serving the Thames Estuary ports. The derailment took place on a key railway route linking London Gateway with the wider national network. The affected service was travelling from London Gateway to Hams Hall when the accident occurred. The derailed train came to a halt, with trailing wagons lodged in Barking station. Fortunately, no injuries resulted.

In the immediate aftermath, DP World reported a reduced rail freight service at London Gateway while it worked with customers and Network Rail. Forth Ports, meanwhile, confirmed that the line was closed and that no freight trains would run to or from Tilbury during the following week. Both ports faced disruption to their normal rail connections – and are only now able to address a backlog of containers.

Leave a Reply

Your email address will not be published. Required fields are marked *