{"id":192344,"date":"2025-03-29T07:00:00","date_gmt":"2025-03-28T21:00:00","guid":{"rendered":"http:\/\/www.vibewire.com.au\/?guid=6afd096ddf8a60d338d05934fab96102"},"modified":"2025-03-29T07:00:00","modified_gmt":"2025-03-28T21:00:00","slug":"nasa-boosts-efficiency-with-custom-x-66-flooring","status":"publish","type":"post","link":"https:\/\/www.vibewire.com.au\/?p=192344","title":{"rendered":"NASA Boosts Efficiency with Custom X-66 Flooring"},"content":{"rendered":"
\n
\n
\n

2 min read<\/p>\n

Preparations for Next Moonwalk Simulations Underway (and Underwater)<\/h1>\n<\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\"A<\/a><\/figure>
\n
Eric Garza, an engineering technician in the Experimental Fabrication Shop at NASA\u2019s Armstrong Flight Research Center in Edwards, California, cuts plywood to size for temporary floorboards for the X-66 experimental demonstrator aircraft on Aug. 26, 2024.<\/div>\n
NASA\/Steve Freeman<\/div>\n<\/figcaption><\/div>\n<\/div>\n<\/div>\n

NASA designed temporary floorboards for the MD-90 aircraft to use while it is transformed into the X-66 experimental demonstrator aircraft. These floorboards will protect the original flooring and streamline the modification process.<\/p>\n

Supporting the agency\u2019s Sustainable Flight Demonstrator project, a small team in the Experimental Fabrication Shop at NASA\u2019s Armstrong Flight Research Center in Edwards, California, built temporary floorboards to save the project time and resources. Repeated removal and installation of the original flooring during the modification process was time-consuming. Using temporary panels also ensures the original floorboards are protected and remain flightworthy for when modifications are complete, and the original flooring is reinstalled.<\/p>\n

\u201cThe task of creating the temporary floorboards for the MD-90 involves a meticulous process aimed at facilitating modifications while maintaining safety and efficiency. The need for these temporary floorboards arises from the detailed procedure required to remove and reinstall the Original Equipment Manufacturer (OEM) floorboards,\u201d said Jason Nelson, experimental fabrication lead. He is one of two members of the fabrication team \u2013 one engineering technician and one inspector \u2013 manufacturing about 50 temporary floorboards, which range in size from 20 inches by 36 inches to 42 inches by 75 inches.<\/p>\n

\n
\n
\n
\"A<\/a><\/figure>
\n
A wood router cuts precise holes in plywood for temporary floorboards on Aug. 26, 2024, in the Experimental Fabrication Shop at NASA\u2019s Armstrong Flight Research Center in Edwards, California. The flooring was designed for the X-66 experimental demonstrator aircraft. <\/div>\n
NASA\/Steve Freeman<\/div>\n<\/figcaption><\/div>\n<\/div>\n<\/div>\n

Nelson continued, \u201cSince these OEM boards will be removed and reinstalled multiple times to accommodate necessary modifications, the temporary floorboards will save the team valuable time and resources. They will also provide the same level of safety and strength as the OEM boards, ensuring that the process runs smoothly without compromising quality.\u201d<\/p>\n

Designing and prototyping the flooring was a meticulous process, but the temporary solution plays a crucial role in optimizing time and resources as NASA works to advance safe and efficient air travel. The agency\u2019s Sustainable Flight Demonstrator project seeks to inform the next generation of single-aisle airliners, the most common aircraft in commercial aviation fleets around the world. NASA partnered with Boeing to develop the X-66 experimental demonstrator aircraft.<\/p>\n

NASA Armstrong\u2019s Experimental Fabrication Shop carries out modifications and repair work on aircraft, ranging from the creation of something as small as an aluminum bracket to modifying wing spars, fuselage ribs, control surfaces, and other tasks to support missions.<\/p>\n

\n
\n
\n
\"A<\/a><\/figure>
\n
Eric Garza, an engineering technician in the Experimental Fabrication Shop at NASA\u2019s Armstrong Flight Research Center in Edwards, California, observes a wood router cut holes for temporary floorboards on Aug. 26, 2024. The flooring was designed for the X-66 experimental demonstrator aircraft.\u00a0 <\/div>\n
NASA\/Steve Freeman<\/div>\n<\/figcaption><\/div>\n<\/div>\n<\/div>\n
\n
\n
\n
\n
\n
\n

Share<\/h2>\n<\/p><\/div>\n
\n